Paving Contractor
in Plum?

Most residential asphalt driveways in Plum, PA are paved in 1-2 days. However, new installations requiring full excavation and gravel base installation may take 2-3 days total. The asphalt itself needs 24-48 hours to cure before driving on it, and full cure (for heavy vehicles) takes up to 2 weeks in Pennsylvania's summer heat. Your contractor will walk you through the specific timeline before work begins.

A new asphalt driveway in Plum typically costs between $2833 and $8096 for an average-sized residential driveway (600-1,500 sq ft), including excavation, gravel base, hot-mix asphalt and grading. Larger driveways or those requiring significant excavation or drainage work cost more. Sealcoating typically adds $283-$961. Get a free written estimate from a licensed Plum paving contractor before committing to any work.

Sealcoating a Plum asphalt driveway every 2-3 years is the standard recommendation. New asphalt should be sealed after 6-12 months (once fully cured). Sealcoating fills surface oxidation, blocks UV damage and prevents water infiltration — the main cause of freeze-thaw cracking in Pennsylvania's climate. At $283-$961 per application, regular sealcoating is the most cost-effective maintenance you can do to protect your $2833+ driveway investment.

Late spring (May-June) through early fall (September-October) is ideal for asphalt paving in Plum — temperatures above 50°F are required for proper hot-mix asphalt compaction and curing. Avoid paving in winter or when rain is forecast. Many Plum paving contractors book up in summer, so scheduling your free estimate in early spring ensures preferred timing. Sealcoating should be done when daytime temps are consistently above 55°F.

General rule: if your driveway is under 15 years old and damage is limited to surface cracks and a few potholes, repair and sealcoating at $657-$2429 is cost-effective. If the driveway is 20+ years old, has widespread alligator cracking, significant base failure, or drainage issues, full replacement at $2833-$8096 is the better long-term investment. A licensed Plum paving contractor can assess this for free.

For a residential driveway in Plum, the standard is 2-3 inches of compacted hot-mix asphalt over a 4-6 inch compacted gravel base. The base is as important as the asphalt — a properly compacted gravel base prevents settling, cracking and drainage issues in Pennsylvania's frost-prone climate. Driveways used by heavy vehicles (trucks, RVs) should have a thicker asphalt layer (3-4 inches). Our Plum contractors provide material specs with every estimate.